The MAX3752 quad-port bypass IC is designed for use in the Fibre Channel Arbitrated Loop topology. This device consists of four serially connected port bypass circuits (PBCs) and a repeater that provides clock and data recovery (CDR). The quad-port bypass circuit allows connection of up to four Fibre Channel L-Ports, which can each be enabled or bypassed by .
MAX3752
Ordering Information
PART MAX3752CCM TEMP. RANGE 0°C to +70°C PIN-PACKAGE 48 TQFP-EP
*
________________________Applications
2.125Gbps Fibre Channel Fibre Channel Data Storage Systems Storage Area Networks Fibre Channel Hubs
*EP = Exposed pad
Pin Configuration
LOUT2+ LOUT2LOUT3+ LOUT3GND
41 40 39
GND LIN2+ LIN2-
48
47
46
45
44
43
42
38
37
LIN3+ LIN3-
GND GND
Typical Operating Circuit appears at end of data sheet.
GND LIN1LIN1+ GND LOUT1LOUT1+ GND GND ININ+ GND CLKEN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
36 35 34 33 32 31
MAX3752
30 29 28 27.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX3750 |
Maxim |
+3.3V / 2.125Gbps/1.0625Gbps Fibre Channel Port Bypass ICs | |
2 | MAX3751 |
Maxim Integrated |
+3.3V / 2.125Gbps/1.0625Gbps Fibre Channel Port Bypass ICs | |
3 | MAX3754 |
Maxim |
1Gbps/2Gbps Fibre Channel Quad-Port Bypass ICs | |
4 | MAX3755 |
Maxim Integrated |
1Gbps/2Gbps Fibre Channel Quad-Port Bypass ICs | |
5 | max3701 |
Maxim |
2x Blue Laser Driver with Sample and Hold | |
6 | MAX3735 |
Maxim |
2.7Gbps / Low-Power SFP Laser Drivers | |
7 | MAX3735A |
Maxim Integrated |
Low-Power SFP Laser Driver | |
8 | MAX3736 |
Maxim Integrated Products |
SFP Laser Driver | |
9 | MAX3737 |
Maxim |
Multirate Laser Driver | |
10 | MAX3738 |
Maxim Integrated Products |
155Mbps to 4.25Gbps SFF/SFP Laser Driver | |
11 | MAX3740 |
Maxim |
3.2Gbps SFP VCSEL Driver | |
12 | MAX3740A |
Maxim Integrated Products |
SFP VCSEL Driver |