The MAX3643 burst-mode laser driver provides bias and modulation current drive for PON burst-mode ONT applications. It is specifically designed for use with a low-cost external controller for the APC (and if desired, AMC) loop. A high-speed differential burst-enable input enables the driver to switch the laser from a dark (output off) condition to full on-co.
♦ 10mA to 85mA Modulation Current ♦ 1mA to 70mA Bias Current ♦ Monitor Diode Sample and Hold ♦ 45ps Output Transition Time ♦ 2ns Turn-On/-Off Time ♦ Reference Voltage Generator ♦ LVPECL High-Speed Inputs (Data, Burst Enable)
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX3643ETG
-40°C to +85°C 24 TQFN-EP
*
MAX3643ETG+
-40°C to +85°C 24 TQFN-EP
*
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed paddle.
Pin Configuration appears at end of data sheet.
Typical Application Circuit
3.3V
3.3V
SERIAL DATA SOURCE
130Ω 130Ω Z0 = 50Ω Z0 = 50Ω
82Ω 82Ω
IN+ IN-
3.3V
+3.3V
FI.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX364 |
Maxim |
Precision / Quad / SPST Analog Switches | |
2 | MAX3640 |
Maxim Integrated Products |
Dual 4:2 Crosspoint Switch | |
3 | MAX3645 |
Maxim Integrated Products |
125Mbps to 200Mbps Limiting Amplifier | |
4 | MAX3646 |
Maxim Integrated Products |
155Mbps to 622Mbps Sff/sfp Laser Driver | |
5 | MAX3600 |
Maxim Integrated Products |
Laser Driver | |
6 | MAX361 |
Maxim |
Precision / Quad / SPST Analog Switches | |
7 | MAX362 |
Maxim Integrated |
Precision / Quad / SPST Analog Switches | |
8 | MAX3620 |
Maxim Integrated Products |
Delay Lines | |
9 | MAX3622 |
Microsemi |
Precision Clock Generator | |
10 | MAX3622 |
Maxim Integrated Products |
Precision Clock Generator | |
11 | MAX3624 |
Maxim Integrated Products |
Precision Clock Generator | |
12 | MAX3624A |
Maxim Integrated Products |
Precision Clock Generator |