The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. The MAX3097E/MAX3098E indicate when a receiver input is in an open-circuit condition, short-circuit condition, or outside the common-mode.
●
● Detects the Following RS-485 Faults:
• Open-Circuit Condition
• Short-Circuit Condition
• Low Differential Voltage Signal
• Common-Mode Range Violation
●
● ESD Protection
• ±15kV—Human Body Model
• ±15kV—IEC 1000-4-2, Air-Gap Discharge Method
• ±8kV—IEC 1000-4-2, Contact Discharge Method
●
● Single +3V to +5.5V Operation
●
● -10V to +13.2V Extended Common-Mode Range
●
● Capacitor-Programmable Delay of Fault Indication Allows Error-Free Operation at Slow Data Rates
●
● Independent and Universal Fault Outputs
●
● 32Mbps Data Rate
●
● 16-Pin QSOP is 40% Smaller than IndustryStandard 26LS31/32 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX309 |
Maxim |
Precision / 8-Channel/Dual 4-Channel / High-Performance / CMOS Analog Multiplexers | |
2 | MAX3093E |
Maxim |
15kV ESD-Protected / 10Mbps / 3V/5V / Low-Power Quad RS-422/RS-485 Receivers | |
3 | MAX3094E |
Maxim |
15kV ESD-Protected / 10Mbps / 3V/5V / Low-Power Quad RS-422/RS-485 Receivers | |
4 | MAX3095 |
Maxim |
15kV ESD-Protected / 10Mbps / 3V/5V / Quad RS-422/RS-485 Receivers | |
5 | MAX3096 |
Maxim |
15kV ESD-Protected / 10Mbps / 3V/5V / Quad RS-422/RS-485 Receivers | |
6 | MAX3097E |
Maxim |
Triple RS-422/RS-485 Receivers | |
7 | MAX30001 |
Maxim Integrated |
Single-Channel Integrated Biopotential and Bioimpedance AFE | |
8 | MAX30002 |
Maxim Integrated |
Single-Channel Integrated Bioimpedance AFE | |
9 | MAX30003 |
Maxim Integrated |
Ultra-Low Power Single-Channel Integrated Biopotential | |
10 | MAX30003 |
Analog Devices |
Single-Channel Integrated Biopotential AFE | |
11 | MAX30009 |
Analog Devices |
Bioimpedance Analog Front-End | |
12 | MAX3000E |
Maxim |
+1.2V to +5.5V / 15kV ESD-Protected / 0.1A / 35Mbps / 8-Channel Level Translators |