The MAX2654/MAX2655/MAX2656 high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in GPS, PCS, WLL, and satellite phone systems. The MAX2654/MAX2655/MAX2656 incorporate on-chip internal output matching to 50Ω, eliminating the need for external matching components. A shutdown feature in the MAX2654/MAX2655 reduces t.
o Low Noise Figure MAX2654: 1.5dB at 1575MHz MAX2655: 1.45dB at 1575MHz MAX2656: 1.9dB at 1960MHz o High Gain MAX2654: 15.1dB at 1575MHz MAX2655: 14.1dB at 1575MHz MAX2656: 13.5dB at 1960MHz o 12.7dB Gain Step (MAX2656 only) o Integrated 50Ω Output Matching o Variable IP3 Set by One Bias Resistor (MAX2655/MAX2656 only) o 0.1µA Shutdown Mode (MAX2654/MAX2655 only) o +2.7V to +5.5V Single-Supply Operation o Ultra-Small 6-Pin SC70 Package General Description The MAX2654/MAX2655/MAX2656 high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in GPS, PCS, .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX265 |
Maxim |
Pin and Resistor Programmed Universal Active Filters | |
2 | MAX2650 |
Maxim |
+5V Low-Noise Amplifier | |
3 | MAX2651 |
Maxim |
Low-Noise Amplifiers | |
4 | MAX2652 |
Maxim |
Low-Noise Amplifiers | |
5 | MAX2653 |
Maxim |
Low-Noise Amplifiers | |
6 | MAX2655 |
Maxim Integrated |
1575MHz/1900MHz Variable-IP3 Low-Noise Amplifiers | |
7 | MAX2656 |
Maxim Integrated |
1575MHz/1900MHz Variable-IP3 Low-Noise Amplifiers | |
8 | MAX2657 |
Maxim Integrated Products |
(MAX2657 / MAX2658) GPS/GNSS Low-Noise Amplifiers | |
9 | MAX2658 |
Maxim Integrated Products |
(MAX2657 / MAX2658) GPS/GNSS Low-Noise Amplifiers | |
10 | MAX260 |
Maxim Integrated |
Microprocessor Programmable Universal Active Filters | |
11 | MAX2601 |
Maxim |
1W RF Power Transistors | |
12 | MAX2602 |
Maxim |
1W RF Power Transistors |