The MAX1672 integrates a step-up DC-DC converter with a linear regulator to provide step-up/down voltage conversion. This device provides a constant output voltage for inputs that vary above and below the output voltage. It has a 1.8V to 11V input range and a preset 3.3V or 5V output. The output can also be set from 1.25V to 5.5V using two resistors. Typical.
o Step-Up/Down Voltage Conversion o 1.8V to 11V Input Range o 3.3V/5V or Adjustable Output Voltage Range o Output Current: 300mA at 5V (VIN ≥ 2.5V) 150mA at 5V (VIN ≥ 1.8V) o Smaller Inductor than SEPIC and Flybacks o Load Disconnects from Input in Shutdown o Supply Current from Battery: 85µA (No-Load) 0.1µA (Shutdown) o PGI/PGO Low-Battery Comparator o 16-Pin QSOP Package (same footprint as 8-pin SO) o No External FETs Required o Thermal and Short-Circuit Protection ________________General Description The MAX1672 integrates a step-up DC-DC converter with a linear regulator to provide step-up.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX167 |
Maxim Integrated Products |
(MAX163 - MAX167) CMOS 12-Bit A/D Converters | |
2 | MAX1673 |
Maxim |
Regulated / 125mA-Output / Charge-Pump DC-DC Inverter | |
3 | MAX1674 |
Maxim |
Step-Up DC-DC Converters | |
4 | MAX1675 |
Maxim Integrated |
Step-Up DC-DC Converters | |
5 | MAX1676 |
Maxim Integrated |
Step-Up DC-DC Converters | |
6 | MAX1677 |
Maxim |
Compact / High-Efficiency / Dual-Output Step-Up and LCD Bias DC-DC Converter | |
7 | MAX1678 |
Maxim |
Step-Up DC-DC Converter | |
8 | MAX1679 |
Maxim |
Single-Cell Li Battery Charger for Current-Limited Supply | |
9 | MAX160 |
Maxim |
uP Compatible 8 Bit A/D Converter | |
10 | MAX1600 |
Maxim |
Dual-Channel CardBus and PCMCIA VCC/VPP Power-Switching Networks | |
11 | MAX1601 |
Maxim |
Dual-Channel CardBus and PCMCIA Power Switches with SMBus Serial Interface | |
12 | MAX16010 |
Maxim Integrated Products |
(MAX16010 - MAX16014) Overvoltage Protection/Detection Circuits |