Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The MAX16140/MAX16142/MAX16144/MAX16146/ MAX16156/MAX16157/MAX16158/MAX16159 are ultralow-current, single-channel supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments and asserts a reset when VCC voltage falls below the reset threshold. The reset output remains asserted for the reset timeout period after the VCC vt.
●
● 370nA Quiescent Current, Extends Battery Life
●
● Edge/Level Trigger MR Input
●
● Factory-Set Reset Timeout Period
●
● MR Debounce Circuitry
●
● Factory-Set Threshold: 1.7V to 4.85V
●
● WLP and SOT23 Packages
●
● -40°C to +125°C Temperature Range
Ordering Information appears at end of data sheet.
Simplified Block Diagram
1.7V to 5.5V
VCC
MAX16140/MAX16142 MAX16144/MAX16146 MAX16156/MAX16157 MAX16158/MAX16159
MR GND
RST
VCC µP
GND
19-100095; Rev 6; 11/19
MAX16140/MAX16142/MAX16144/ MAX16146/MAX16156
–MAX16159
nanoPower, Tiny Supervisor with Manual Reset Input
Absolute Maximum Ratings
VCC .
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | MAX1615 |
Maxim |
Low-Power Linear Regulators |
|
| 2 | MAX16150 |
Maxim Integrated |
nanoPower Pushbutton On/Off Controller |
|
| 3 | MAX16152 |
Maxim Integrated |
nanoPower Supervisor and Watchdog Timer |
|
| 4 | MAX16153 |
Maxim Integrated |
nanoPower Supervisor and Watchdog Timer |
|
| 5 | MAX16154 |
Maxim Integrated |
nanoPower Supervisor and Watchdog Timer |
|
| 6 | MAX16155 |
Maxim Integrated |
nanoPower Supervisor and Watchdog Timer |
|
| 7 | MAX16156 |
Maxim Integrated |
nanoPower Tiny Supervisor |
|
| 8 | MAX16158 |
Maxim Integrated |
nanoPower Tiny Supervisor |
|
| 9 | MAX16159 |
Maxim Integrated |
nanoPower Tiny Supervisor |
|
| 10 | MAX161 |
Maxim |
CMOS 8-Bit 8Channel Data Acquisition System |
|
| 11 | MAX1610 |
Maxim |
Digitally Controlled CCFL Backlight Power Supplies |
|
| 12 | MAX1611 |
Maxim |
Digitally Controlled CCFL Backlight Power Supplies |
|