The M660-02 is a dual SAW, selectable frequency VCSO frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M660-02 is available in a range of center frequencies from 500 to 700MH.
◆ Two integrated SAW devices ◆ Selectable output frequency ◆ Supports multi-rate optical interface requirements ◆ VCSO center frequencies from 500 to 700 MHz (Specify center frequency at time of order) ◆ Low phase jitter 0.19ps rms typical (50kHz-80MHz) ◆ Low phase noise -70dBc/Hz @ 1kHz offset ◆ Differential 3.3V LVPECL output ◆ Single 3.3V power supply ◆ Small 9 x 14mm SMT (surface mount) package Sample of Available Output Frequencies VCSO Center Frequency1 (MHz) 622.0800 625.0000 644.5313 669.3265 Applications SONET/SDH Gigabit Ethernet Gigabit Ethernet FEC SONET/SDH FEC Table 1: Sample o.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | M660-01 |
Integrated Circuit Systems |
Voltage Controlled SAW Oscillator | |
2 | M660 |
Integrated Circuit Systems |
DUAL SAW / SELECTABLE FREQUENCY VCSO | |
3 | M66004FP |
Mitsubishi |
null16-DIGIT 5x7-SEGMENT VFD CONTROLLER | |
4 | M66004M6FP200D |
ETC |
C-MOS 7 Segments Fluorescent Display Controller | |
5 | M66004SP |
Mitsubishi |
null16-DIGIT 5x7-SEGMENT VFD CONTROLLER | |
6 | M66006FP |
Mitsubishi |
12-BIT I/O EXPANDER | |
7 | M66006P |
Mitsubishi |
12-BIT I/O EXPANDER | |
8 | M66007FP |
Mitsubishi |
12-BIT INPUT EXPANDER | |
9 | M66007P |
Mitsubishi |
12-BIT INPUT EXPANDER | |
10 | M66008FP |
Mitsubishi |
16-BIT I/O EXPANDER | |
11 | M66008P |
Mitsubishi |
16-BIT I/O EXPANDER | |
12 | M66009FP |
Mitsubishi |
8-BIT I/O EXPANDER WITH 5-BIT ADDRESS |