The LX8382/8382A series ICs are positive regulators designed to provide 10A output current. All internal circuitry is designed to operate down to a 1V input-to-output differential, so the LX8382/82A can operate with greater efficiency than previously available devices. The dropout voltage for each product is fully specified as a function of load current. Dro.
expected of voltage regulators: short circuit protection, safe operating area protection and automatic thermal shutdown if the device temperature rises above approximately 165°C. Use of an output capacitor is REQUIRED with the LX8382/82A series. Please see the table below for recommended minimum capacitor values. These regulators offer a more tightly controlled reference voltage tolerance and superior reference stability when measured against the older pin-compatible regulator types that they replace. STABILITY The output capacitor is part of the regulator’s frequency compensation system. Many.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LX8382A-33CP |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
2 | LX8382A-33 |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
3 | LX8382A-00 |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
4 | LX8382A-00CP |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
5 | LX8382A-00CV |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
6 | LX8382-00 |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
7 | LX8382-00CP |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
8 | LX8382-00CV |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
9 | LX8382-33 |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
10 | LX8382-33CP |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
11 | LX8382-33CV |
Microsemi Corporation |
10 A LOW DROPOUT POSITIV E REGULATORS | |
12 | LX8383 |
Microsemi Corporation |
7.5 A LOW DROPOUT POSITIVE REGULATORS |