This 8-bit (octal) noninverting bus transceiver contains two separate supply rails; B port has VCCB, which is set at 3.3 V, and A port has VCCA, which is set at 5 V. This allows for translation from a 3.3-V to a 5-V environment, and vice versa. (5 V) VCCA DIR A1 A2 A3 A4 A5 A6 A7 A8 GND GND 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 V.
rom the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. The SN74LVC4245A pinout allows the designer to switch to a normal all-3.3-V or all-5-V 20-pin ’245 device without board re-layout. The designer uses the data paths for pins 2
–11 and 14
–23 of the SN74LVC4245A to align with the conventional ’245 pinout. The SN74LVC4245A is characterized for operation from
–40°C to 85°C.
FUNCTION TABLE INPUTS OE L L H DIR L H X OPERATION.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LVC404018 |
Chilisin Electronics |
Sealed Power Inductors | |
2 | LVC404018 |
Chilisin Electronics |
Sealed Power Inductors | |
3 | LVC46Z806YS |
Nanya |
LCD | |
4 | LVC00A |
Texas Instruments |
Quadruple 2-Input Positive-NAND Gate | |
5 | LVC02A |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATE | |
6 | LVC02AM |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATE | |
7 | LVC02AQ |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATE | |
8 | LVC04A |
Texas Instruments |
Hex Inverter | |
9 | LVC06A |
Texas Instruments |
HEX INVERTER BUFFERS/DRIVERS | |
10 | LVC06AM |
Texas Instruments |
HEX INVERTER BUFFERS/DRIVERS | |
11 | LVC06AQ |
Texas Instruments |
HEX INVERTER BUFFERS/DRIVERS | |
12 | LVC08A |
Texas Instruments |
Quadruple 2-Input Positive-AND Gate |