Current sensing resistor connection Output pin Analog system power supply Logic system power supply *1 I2C SDA input I2C SCL input Power-down & reset *2 1 GND 2 RFG 3 OUT 4 VCC *1 : The voltage applied to the VDD pin must be set to the same level as those of the SDA, SCL and PD input high-level voltages. *2 : Setting the PD pin to low level powers down.
• Constant current driver for voice coil motors.
• Constant current control enabled by DAC (8 bits).
• Wide operating voltage range (2.5 to 5.5V).
• I2C bus control supported.
• No external capacitors needed (capacitor-less).
• Ultraminiature package (USLP8 : 2.0×1.3×0.56mm) for easy soldering.
• Built-in thermal protection circuit.
• Built-in voltage drop protection circuit.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Maximum supply voltage Maximum VDD voltage Output voltage Input voltage GND pin source current Allowable power dissipation Operating temperature Storage temp.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LV8092GQ |
Sanyo Semiconductors |
Bi-CMOS LSI Piezo Actuator Driver IC | |
2 | LV8094CT |
ON Semiconductor |
Piezo Actuator Driver IC | |
3 | LV8098CS |
Sanyo Semiconductors |
Constant-current Driver IC | |
4 | LV8099CS |
Sanyo Semiconductors |
Constant-current Driver IC | |
5 | LV8011V |
Sanyo Semicon Device |
Forward/Reverse Motor Driver | |
6 | LV8012T |
Sanyo Semicon Device |
Forward/Reverse Motor Driver | |
7 | LV8012T |
ON Semiconductor |
Forward/Reverse Motor Driver | |
8 | LV8013T |
Sanyo Semiconductors |
Forward/Reverse Motor Driver | |
9 | LV8013T |
ON Semiconductor |
Forward/Reverse Motor Driver | |
10 | LV8014T |
Sanyo Semicon Device |
Forward/Reverse Motor Driver | |
11 | LV8014T |
ON Semiconductor |
Forward/Reverse Motor Driver | |
12 | LV8018W |
Sanyo Semiconductors |
4ch PWM H-bridge Driver |