Pin No. 1 Pin name IN1 Pin voltage Description Hall input pin (+) Equivalent circuit www.DataSheet4U.com 1 3 IN2 Hall input pin (-) 3 2 REG 1.05V (typ) Hall bias output pin 2 4 5 6 SGND PGND OUT1 0V Signal GND Power GND 7 OUT2 - Motor drive output pin 6 7 8 9 10 SVCC PVCC FG 2.2V to 6.0V - Signal power source Power source FG pulse output p.
quiet operation that suppresses reactive current through BTL output system. The speed control range can be adjusted to desired values by the external application program, so that it can rotate fan at lower speeds than conventional drivers in the same driver voltage control range. It is optimal for use in applications that require low noise and power saving, including CPU coolers.
Functions
• Single-phase full-wave drive with BTL output (BTL amplifier gain = 43dB)
• Speed control gain adjusted by SET pin
• Constant-voltage output pin for Hall bias (VREG = 1.05V typ)
• FG output pin (open colle.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LV8062FA |
ON Semiconductor |
Single-Phase Full-Wave Driver | |
2 | LV8063TT |
Sanyo Semicon Device |
Single-Phase Full-Wave Driver | |
3 | LV8068V |
ON Semiconductor |
Single-Phase Full-Wave Driver | |
4 | LV8011V |
Sanyo Semicon Device |
Forward/Reverse Motor Driver | |
5 | LV8012T |
Sanyo Semicon Device |
Forward/Reverse Motor Driver | |
6 | LV8012T |
ON Semiconductor |
Forward/Reverse Motor Driver | |
7 | LV8013T |
Sanyo Semiconductors |
Forward/Reverse Motor Driver | |
8 | LV8013T |
ON Semiconductor |
Forward/Reverse Motor Driver | |
9 | LV8014T |
Sanyo Semicon Device |
Forward/Reverse Motor Driver | |
10 | LV8014T |
ON Semiconductor |
Forward/Reverse Motor Driver | |
11 | LV8018W |
Sanyo Semiconductors |
4ch PWM H-bridge Driver | |
12 | LV8019LP |
Sanyo Semiconductors |
Bi-CMOS IC Forward/Reverse Motor Driver |