Connecting a resistor terminal for Full scale LED current setting Constant Current Output_pin2 Constant Current Output_pin1 PWM dimming input (active High). Filtering capacitor terminal for PWM mode Ground 1-wire control and Enable control input (active High). Supply voltage. Switch pin. Drain of the internal power FET. Pd-Max Mounted on a specified board .
ax
Operating temperature
Topr
Storage temperature
Tstg
Conditions VCC SW
Other pin Ta=25°C
*1
Ratings
6
40
5.5
0.95 −40 to +85 −55 to +125
Unit V
V
V W °C °C
*1 Mounted on a specified board: 70mm×70mm×1.6mm (4 layer glass epoxy) Caution 1) Absolute maximum ratings represent the values which cannot be exceeded for any length of time. Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high
temperature, high current, high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please con.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LV52207NXB |
ON Semiconductor |
LED Boost Driver | |
2 | LV52207AXA |
ON Semiconductor |
Dual channel LED Boost Driver | |
3 | LV52207XA |
ON Semiconductor |
Dual channel LED Boost Driver | |
4 | LV5223GR |
Sanyo Semicon Device |
LED Driver | |
5 | LV5212VH |
Sanyo Semicon Device |
8ch LED Driver | |
6 | LV52130A0XA |
ON Semiconductor |
1coil Boost DC-DC converter and Inverter Charge Pump | |
7 | LV52130A4XA |
ON Semiconductor |
1coil Boost DC-DC converter and Inverter Charge Pump | |
8 | LV52133A |
ON Semiconductor |
Programmable DC-DC Converter | |
9 | LV5213LP |
Sanyo Semicon Device |
3ch LED Driver | |
10 | LV5213LP |
ON Semiconductor |
3ch LED Driver | |
11 | LV5215LF |
Sanyo Semicon Device |
4ch LED Driver | |
12 | LV5216CS |
Sanyo Semicon Device |
LED Driver |