Current Transducer LT 1000-SI For the electronic measurement of currents : DC, AC, pulsed..., with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit). IPN = 1000 A Electrical data IPN IP RM Primary nominal r.m.s. current Primary current, measuring range Measuring resistance with ± 15 V ISN KN VC I.
• Closed loop (compensated) current
transducer using the Hall effect
• Insulated plastic case recognized
according to UL 94-V0.
Secondary nominal r.m.s. current Conversion ratio Supply voltage (± 5 %) Current consumption R.m.s. voltage for AC isolation test, 50 Hz, 1 mn
200 1 : 5000 ± 15 25 + IS 6
Advantages
•
•
•
•
•
•
•
Excellent accuracy Very good linearity Low temperature drift Optimized response time Wide frequency bandwidth No insertion losses High immunity to external interference
• Current overload capability.
Accuracy - Dynamic performance data
XG
ε
L
Overall accuracy @ IPN , .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LT1000-1.5W |
ETC |
Unmounted Laser Diode Chips | |
2 | LT1000-15W |
ETC |
Unmounted Laser Diode Chips | |
3 | LT10000-S |
LEM |
Current Transducer LT 10000-S | |
4 | LT100-S |
LEM |
Current Sensor | |
5 | LT1001 |
Linear Technology |
Precision Operational Amplifier | |
6 | LT1001A |
Advanced Semiconductor |
NPN SILICON HIGH FREQUENCY TRANSISTOR | |
7 | LT1002 |
Linear Technology |
Dual / Matched Precision Operational Amplifier | |
8 | LT1003 |
Linear Technology |
5 Volt / 5 Amp Voltage Regulator | |
9 | LT1004 |
Linear Technology |
Micropower Voltage Reference | |
10 | LT1004-1.2 |
ETCTI |
Micropower Integrated Voltage References (Rev. M) | |
11 | LT1004-2.5 |
ETCTI |
Micropower Integrated Voltage References (Rev. M) | |
12 | LT1005-S |
LEM |
Current Transducer LT 1005-S |