The LP8774x device is designed to meet the power management requirements of the IWR MMICs in various industrial radar applications. The device has three step-down DC/DC converters, a 5-V boost converter and a 1.8 V or 3.3 V LDO. The LDO is powered from the boost and intended for xWR I/O supply. An SPI serial interface and enable signals control the device. .
• Device operating temperature :
–40°C to +125°C ambient
• Input voltage: 3.3 V nominal (3 V to 4 V range)
• Three low-noise step-down DC/DC converters:
– Output voltage: 0.9 V to 1.9 V, 0.8 V (BUCK3), 0.82 V (BUCK3)
– Maximum output current: 3 A/ 3 A/ 3 A
– Switching frequency: 4.4 MHz, 8.8 MHz, and
17.6 MHz
• 5 V boost converter
– Maximum output current: 350 mA
• 150 mA LDO
– Output voltage 1.8 V or 3.3 V
• Output short-circuit and overload protection
• Input overvoltage protection (OVP) and
undervoltage lockout (UVLO)
• Overtemperature warning and protection
• Serial peripheral interface (S.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LP8720 |
National Semiconductor |
One Step-Down DC/DC and Five Linear Regulators | |
2 | LP8720 |
Texas Instruments |
One Step-Down DC-DC and Five Linear Regulator | |
3 | LP8725 |
Texas Instruments |
Power-Management | |
4 | LP8725 |
National Semiconductor |
Power Management | |
5 | LP8727 |
Texas Instruments |
Micro/Mini USB Interface | |
6 | LP8728-Q1 |
Texas Instruments |
Quad-Output Step-Down DC/DC Converter | |
7 | LP8728B-Q1 |
Texas Instruments |
Quad-Output Step-Down DC-DC Converter | |
8 | LP8728C-Q1 |
Texas Instruments |
Quad-Output Step-Down DC-DC Converter | |
9 | LP8728D-Q1 |
Texas Instruments |
Quad-Output Step-Down DC-DC Converter | |
10 | LP8731-Q1 |
Texas Instruments |
Dual High-Current Step-Down DC-DC And Dual Linear Regulator | |
11 | LP8732-Q1 |
Texas Instruments |
Dual High-Current Buck Converter and Dual Linear Regulator | |
12 | LP873200-Q1 |
Texas Instruments |
Dual High-Current Buck Converter and Dual Linear Regulator |