Intended for analog and digital satellite receivers, the LNBP is a monolithic linear voltage regulator, assembled in PowerSO-20 and PowerSO-10, specifically designed to provide the powering voltages and the interfacing signals to the LNB downconverter situated in the antenna PowerSO-20 10 1 PowerSO-10 via the coaxial cable. Since most satellite receivers .
the regulator is available at one of two logic-selectable output pins (LNBA, LNBB). When the IC is powered and put in Stand-by (EN pin LOW), both regulator outputs are disabled to allow the antenna downconverters to be supplied/controlled by others satellite receivers sharing the same coaxial lines. In this occurrence the device will limit at 3 mA (max) the backward current that could flow from LNBA and LNBB output pins to GND. (See continuous description). Order codes Part number May 2007 LNBP10 LNBP11 LNBP12 LNBP13 LNBP14 LNBP15 LNBP16 LNBP20 PowerSO-20 LNBP20PD-TR Rev. 10 Package Po.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LNBP10 |
STMicroelectronics |
LNBP supply and control voltage regulator | |
2 | LNBP10L |
STMicroelectronics |
LNB supply and control voltage regulator | |
3 | LNBP11 |
STMicroelectronics |
LNBP supply and control voltage regulator | |
4 | LNBP11L |
STMicroelectronics |
LNB supply and control voltage regulator | |
5 | LNBP12 |
STMicroelectronics |
LNBP supply and control voltage regulator | |
6 | LNBP13 |
STMicroelectronics |
LNBP supply and control voltage regulator | |
7 | LNBP15 |
STMicroelectronics |
LNBP supply and control voltage regulator | |
8 | LNBP16 |
STMicroelectronics |
LNBP supply and control voltage regulator | |
9 | LNBP20 |
STMicroelectronics |
LNBP supply and control voltage regulator | |
10 | LNBP21 |
STMicroelectronics |
LNBP SUPPLY/CONTROLLER | |
11 | LNBP8 |
STMicroelectronics |
(LNBP8 / LNBP9) LNB SUPPLY AND CONTROL VOLTAGE REGULATOR | |
12 | LNBP8L |
STMicroelectronics |
LNB supply and control voltage regulator |