Pin 1 2 Name BOOST GND Function Boost voltage that drives the internal NMOS control switch. A bootstrap capacitor is connected between the BOOST and SW pins. Signal and Power ground pin. Place the bottom resistor of the feedback network as close as possible to this pin for accurate regulation. Feedback pin. Connect FB to the external resistor divider to set.
■
■
■
■
■
■
■
■
■
■
■
Input voltage range of 3V to 20V Output voltage range of 0.8V to 17V Output current up to 1A 1.6MHz (LMR12010X) and 3 MHz (LMR12010Y) switching frequencies Low shutdown Iq, 30 nA typical Internal soft-start Internally compensated Current-Mode PWM operation Thermal shutdown Thin SOT23-6 package (2.97 x 1.65 x 1mm) Fully enabled for WEBENCH® Power Designer
Efficiency vs Load Current - "X" VOUT = 5V
Performance Benefits
■ Extremely easy to use
■ Tiny overall solution reduces system cost
30166536
Efficiency vs Load Current - "Y" VOUT = 5V
30166534
WEBENCH® is a registere.
The LMR12010 regulator is a monolithic, high frequency, PWM step-down DC/DC converter in a 6pin thin SOT23 package. It p.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LMR12015 |
Texas Instruments |
Step-Down Voltage Regulator | |
2 | LMR12007 |
Texas Instruments |
Step-Down DC-DC Regulator | |
3 | LMR12D14V |
SunLED |
SOLID STATE LAMP | |
4 | LMR12D5V |
SunLED |
SOLID STATE LAMP | |
5 | LMR12WD |
SunLED |
SOLID STATE LAMP | |
6 | LMR1 |
Radiometrix |
VHF Narrow Band FM Low Cost multi channel radio modules | |
7 | LMR10510 |
Texas Instruments |
Step-Down Voltage Regulator | |
8 | LMR10515 |
Texas Instruments |
Step-Down Voltage Regulator | |
9 | LMR10520 |
Texas Instruments |
Step-Down Voltage Regulator | |
10 | LMR10530 |
Texas Instruments |
Step-Down Regulator | |
11 | LMR10A |
GOOD-ARK |
Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers | |
12 | LMR11D14V |
SunLED |
SOLID STATE LAMP |