The LMH™6503 is a wideband, DC coupled, differential input, voltage controlled gain stage followed by a high-speed current feedback Op Amp which can directly drive a low impedance load. Gain adjustment range is more than 70dB for up to 10MHz. Maximum gain is set by external components and the gain can be reduced all the way to cut-off. Power consumption is 3.
1
•23 VS = ±5V, TA = 25°C, RF = 1kΩ, RG = 174Ω, RL = 100Ω, AV = AV(MAX) = 10, Typical Values Unless Specified.
• -3dB BW 135MHz
• Gain Control BW 100MHz
• Adjustment Range (Typical Over Temp) 70dB
• Gain Matching (Limit) ±0.7dB
• Slew Rate 1800V/µs
• Supply Current (No Load) 37mA
• Linear Output Current ±75mA
• Output Voltage (RL = 100Ω) ±3.2V
• Input Voltage Noise 6.6nV/√Hz
• Input Current Noise 2.4pA/√Hz
• THD (20MHz, RL = 100Ω, VO = 2VPP) −57dBc
• Replacement for CLC522
APPLICATIONS
• Variable Attenuator
• AGC
• Voltage Controller Filter
• Multiplier
DESCRIPTION
The LMH™6503 is a wideband,.
The LMH™6503 is a wideband DC coupled differential input voltage controlled gain stage followed by a high-speed current .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LMH6502 |
Texas Instruments |
Linear-in-dB Variable Gain Amplifier | |
2 | LMH6502 |
National Semiconductor |
Wideband / Low Power / Linear-in-dB Variable Gain Amplifier | |
3 | LMH6504 |
Texas Instruments |
Variable Gain Amplifier | |
4 | LMH6504 |
National Semiconductor |
Wideband / Low Power / Variable Gain Amplifier | |
5 | LMH6505 |
National Semiconductor |
Variable Gain Amplifier | |
6 | LMH6505 |
Texas Instruments |
Variable Gain Amplifier | |
7 | LMH6514 |
Texas Instruments |
Variable Gain Amplifier | |
8 | LMH6514 |
National Semiconductor |
Variable Gain Amplifier | |
9 | LMH6515 |
Texas Instruments |
Variable Gain Amplifier | |
10 | LMH6515 |
National Semiconductor |
Digital Controlled / Variable Gain Amplifier | |
11 | LMH6517 |
Texas Instruments |
Dual 16-bit ADC Driver | |
12 | LMH6517 |
National Semiconductor |
IF and Baseband |