The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package (8-Bump DSBGA) using micro SMD package technology. Both allow for single supply operation and are ensured for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltag.
1
•2 (Typical Unless Otherwise Noted)
• LMC6035 in DSBGA Package
• Ensured 2.7V, 3V, 5V and 15V Performance
• Specified for 2 kΩ and 600Ω Loads
• Wide Operating Range: 2.0V to 15.5V
• Ultra Low Input Current: 20fA
• Rail-to-Rail Output Swing
– @ 600Ω: 200mV from Either Rail at 2.7V
– @ 100kΩ: 5mV from Either Rail at 2.7V
• High Voltage Gain: 126dB
• Wide Input Common-Mode Voltage Range
– -0.1V to 2.3V at VS = 2.7V
• Low Distortion: 0.01% at 10kHz
• LMC6035 Dual LMC6036 Quad
• See AN-1112 (Literature Number SNVA009) for DSBGA Considerations
• AEC-Q100 Grade 3 Qualified (LMC6035-Q1)
APPLICATION.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LMC6035 |
National Semiconductor |
Low Power 2.7V Single Supply CMOS Operational Amplifiers | |
2 | LMC6035 |
Texas Instruments |
CMOS Operational Amplifier | |
3 | LMC6032 |
National Semiconductor |
CMOS Dual Operational Amplifier | |
4 | LMC6032 |
Texas Instruments |
CMOS Dual Operational Amplifier | |
5 | LMC6034 |
National Semiconductor |
CMOS Quad Operational Amplifier | |
6 | LMC6034 |
Texas Instruments |
CMOS Quad Operational Amplifier | |
7 | LMC6036 |
Texas Instruments |
CMOS Operational Amplifier | |
8 | LMC6036 |
National Semiconductor |
Low Power 2.7V Single Supply CMOS Operational Amplifiers | |
9 | LMC6001 |
Texas Instruments |
Ultra-Low Input Current Amplifier | |
10 | LMC6001 |
National Semiconductor |
Ultra Ultra-Low Input-Current Amplifier | |
11 | LMC6008 |
National Semiconductor |
8 Channel Buffer | |
12 | LMC6009 |
National Semiconductor |
9 Channel Buffer Amplifier |