No. 5262-4/8 LM7001J, 7001JM Data Input Timing VIH = 2.2 to 6.5 V, VIL = 0 to 0.7 V, Xtal = 5.00 to 7.20 (typ) to 8.00 MHz Data acquisition: On the CL rising edge Note: Data transfers must be started only after the crystal oscillator is operating normally, i.e., after a proper input signal has been supplied to XIN. Parameter Enable setup time Enable hold .
• The LM7001J and LM7001JM are PLL frequency synthesizer LSIs for tuners, making it possible to make up high-performance AM/FM tuners easily.
• These LSIs are software compatible with the LM7000, but do not include an IF calculation circuit.
• The FM VCO circuit includes a high-speed programmable divider that can divide directly.
• Seven reference frequencies: 1, 5, 9, 10, 25, 50, and 100 kHz
• Band-switching outputs (3 bits)
• Controller clock output (400 kHz)
• Clock time base output (8 Hz)
• Serial input circuit for data input (using the CE, CL, and DATA pins)
Package Dimensions
unit: mm 3.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM7001 |
Sanyo |
Direct PLL Frequency Synthesizers | |
2 | LM7001JM |
Sanyo Semicon Device |
Direct PLL Frequency Synthesizers | |
3 | LM7001M |
Sanyo |
Direct PLL Frequency Synthesizers | |
4 | LM7000 |
Sanyo Semicon Device |
Direct PLL Frequency Synthesizer | |
5 | LM7000N |
Sanyo Semicon Device |
Direct PLL Frequency Synthesizer | |
6 | LM7005 |
Sanyo Semicon Device |
Electronic AV Tuner-Use Electronic Tuning PLL Frequency Synthesizer | |
7 | LM7006 |
Sanyo Semicon Device |
Dual PLL Frequency Synthesizer Circuit | |
8 | LM7006H |
Sanyo Semicon Device |
Dual PLL Frequency Synthesizer Circuit | |
9 | LM7007HM |
Sanyo Semicon Device |
Dual-PLL Frequency Synthesizers | |
10 | LM7007M |
Sanyo Semicon Device |
Dual-PLL Frequency Synthesizers | |
11 | LM7008HM |
Sanyo Semicon Device |
Dual-PLL Frequency Synthesizers | |
12 | LM7008M |
Sanyo Semicon Device |
Dual-PLL Frequency Synthesizers |