The LM5145 75-V synchronous buck controller regulates from a high input voltage source or from an input rail subject to high voltage transients, minimizing the need for external surge suppression components. A high-side switch minimum on-time of 40 ns gives large step-down ratios, enabling the direct step-down conversion from a 48-V nominal input to low-vol.
2 Applications
• Versatile synchronous buck DC/DC controller
– Wide input voltage range of 6 V to 75 V
– 0.8-V reference with ±1% feedback accuracy
– Adjustable output voltage from 0.8 V to 60 V
– 40-ns tON(min) for high VIN / VOUT ratio
– 140-ns tOFF(min) for low dropout
– Optimized for CISPR 32 requirements
• Switching frequency from 100 kHz to 1 MHz
– SYNC In and SYNC Out capability
– Selectable diode emulation or FPWM
• 7.5-V gate drivers for standard VTH MOSFETs
– 14-ns adaptive dead-time control
– 2.3-A source and 3.5-A sink capability
– Low-side soft start for prebiased start-up
• Fas.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM5140-Q1 |
Texas Instruments |
Wide Input Range Dual Synchronous Buck Controller | |
2 | LM5141-Q1 |
Texas Instruments |
Wide Input Range Synchronous Buck Controller | |
3 | LM5143 |
Texas Instruments |
3.5-V to 65-V Dual Synchronous Buck DC/DC Controller | |
4 | LM5143-Q1 |
Texas Instruments |
Automotive 3.5-V to 65-V Dual Synchronous Buck Controller | |
5 | LM5143A-Q1 |
Texas Instruments |
Automotive 3.5-V to 65-V Dual Synchronous Buck Controller | |
6 | LM5146 |
Texas Instruments |
100-V Synchronous Buck DC/DC Controller | |
7 | LM5148-Q1 |
Texas Instruments |
Buck DC/DC Controller | |
8 | LM5149 |
Texas Instruments |
DC/DC Controller | |
9 | LM5149-Q1 |
Texas Instruments |
DC/DC Controller | |
10 | LM5100 |
National Semiconductor |
High Voltage High Side and Low Side Gate Driver | |
11 | LM5100 |
Texas Instruments |
High Voltage High Side and Low Side Gate Driver | |
12 | LM5100A |
Texas Instruments |
High-Side and Low-Side Gate Drivers |