The LM5025B is a functional variant of the LM5025 active clamp PWM controller. The functional differences of the LM5025B are as follows: • The maximum PWM duty cycle is limited to less than 75% to reduce voltage stress on the power MOSFETs. • The CS2 hiccup mode threshold is increased to 0.5V • The CS2 filter discharge device is disabled • The VCC regulator .
1
•2 Internal Start-Up Bias Regulator
• 3A Compound Main Gate Driver
• Programmable Line Under-Voltage Lockout
(UVLO) with Adjustable Hysteresis
• Voltage Mode Control with Feed-Forward
• Adjustable Dual Mode Over-Current Protection
• Programmable Overlap or Deadtime between
the Main and Active Clamp Outputs
• Volt x Second Maximum Duty Cycle Clamp
• Programmable Soft-Start
• Current Sense Leading Edge Blanking
• Single Resistor Programmable Oscillator
• Oscillator Up / Down Sync Capability
• Precision 5V Reference
• Thermal Shutdown
PACKAGES
• TSSOP-16
• WSON-16 (5x5 mm) Thermally Enhanced
D.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM5025 |
National Semiconductor |
Active Clamp Voltage Mode PWM Controller | |
2 | LM5025 |
Texas Instruments |
PWM Controller | |
3 | LM5025A |
Texas Instruments |
PWM Controller | |
4 | LM5025A |
National Semiconductor |
Active Clamp Voltage Mode PWM Controller | |
5 | LM5025C |
Texas Instruments |
PWM Controller | |
6 | LM5025D |
Texas Instruments |
PWM Controller | |
7 | LM5020 |
National Semiconductor |
100V Current Mode PWM Controller | |
8 | LM5020 |
Texas Instruments |
PWM Controller | |
9 | LM5021 |
Texas Instruments |
PWM Controller | |
10 | LM5021 |
National Semiconductor |
AC-DC Current Mode PWM Controller | |
11 | LM5021-Q1 |
Texas Instruments |
PWM Controller | |
12 | LM5022 |
Texas Instruments |
60-V Low-Side Controller |