The LM4922 is a ground referenced, fixed-gain audio power amplifier capable of delivering 80mW of continuous average power into a 16Ω single-ended load with less than 1% THD+N from a 3V power supply. The LM4922 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about gr.
a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby elimiwww.DataSheet4U.com nating output-coupling capacitors typically used with normal single-ended loads. The LM4922 features an Automatic Standby Mode circuitry (patent pending). In the absence of an input signal, after approximately 12 seconds, the LM4922 goes into low current standby mode. The LM4922 recovers into full power operating mode immediately after a signal is applied to either the left or right input pins. This feature saves powe.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM4920 |
National Semiconductor |
Stereo Headphone Amplifier | |
2 | LM49200 |
Texas Instruments |
Stereo Class AB Audio Subsystem | |
3 | LM49200TLEVAL |
Texas Instruments |
Stereo Class AB Audio Subsystem | |
4 | LM4921 |
National Semiconductor |
Low Voltage I2S 16-Bit Stereo DAC | |
5 | LM4921 |
Texas Instruments |
Low Voltage I2S 16-Bit Stereo DAC | |
6 | LM4923 |
National Semiconductor |
1.1 Watt Fully Differential Audio Power Amplifier | |
7 | LM4923 |
Texas Instruments |
1.1 Watt Fully Differential Audio Power Amplifier | |
8 | LM4924 |
Texas Instruments |
Stereo Headphone Audio Amplifier | |
9 | LM4924 |
National Semiconductor |
Stereo Headphone Audio Amplifier | |
10 | LM4925 |
National Semiconductor |
2 Cell/ Single Ended Output 40mW Stereo Headphone Audio Amplifier | |
11 | LM49250 |
National Semiconductor |
Enhanced Emissions Suppression Stereo Class D Audio Sub-System | |
12 | LM49251 |
Texas Instruments |
Stereo Audio Subsystem |