LCD contrast adjust voltage Power supply for LCD (-24V) Display data signal Signal ground (OV) Power supply for logic (+5V) Data input clock signal Input data latch signal Scan start-up signal Level H (ON), L (OFF) — — H~L HaL “H“ Used Cable : l,25mm pitch , 12pins F.F, C w CN2 [ Pin No.*] Symbols Description 11 VFT 1 Power supply for CCFT back light.
T, negative type, with backlight system by cold cathode fluorescent tube (CCFT). ) 2. Construction and Outline Construction : 320x240 full dot graphic display unit Outline : See Fig, 8, Connection : See Fig, 8, and Table, 5,8. . There shall be no scrtches, stains, chips, distortions and other external drawbacks that may affect the display function. Rejection criteria shall be noted in Inspection Standard S-U-012-01, . SHARP SPEC No. MODIL No. LC93628D LM32P07 PAGE 2 3, Mechanical SRecification? Parameter Outline dimensions Effective viewing area Display format Dot size Dot spac.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM32P10 |
Sharp Electrionic Components |
Medium Size Graphic Type LCD Module | |
2 | LM32P18 |
Sharp Electrionic Components |
Medium Size Graphic Type LCD Module | |
3 | LM320 |
National Semiconductor |
Series 3-Terminal Negative Regulators | |
4 | LM320-N |
Texas Instruments |
3-Terminal Negative Regulators | |
5 | LM3200 |
National Semiconductor |
Step-Down DC-DC Converter | |
6 | LM320081 |
Sharp |
LCD Module | |
7 | LM320081 |
Sharp |
Passive Matric LCD Unit | |
8 | LM32010P |
Sharp Electrionic Components |
LCD | |
9 | LM320160ACC |
TOPWAY |
LCD | |
10 | LM320160CCW |
Shenzhen |
LCD Module | |
11 | LM320160CCW-1 |
TOPWAY |
LCD | |
12 | LM320160CFW |
TOPWAY |
LCD |