The LM2433 is a single channel high voltage CRT driver circuit designed for use in Rear-Projection and Direct-View EDTV applications. The IC contains a high input impedance, wide band amplifier which can be DC coupled to a cathode of a CRT. The amplifier has its gain internally set to −53 and can drive CRT capacitive loads as well as resistive loads present .
n n n n n 16 MHz bandwith at 110VPP output swing 0V to 4V input range Greater than 110VPP output swing capability IK Current Output (pin 5) for IK feedback systems Emitter (pin 6) access to increase voltage gain Applications n For Rear-Projection and Direct-View DC coupled CRT applications using EDTV formats n Compatible with RGB video processors with IK feedback for automatic cathode calibration Pinout Diagram Schematic Diagram 20146202 Note: Tab is at GND. Top View Order Number LM2433TE FIGURE 1. Simplified Connection and Pinout Diagram FIGURE 2. Simplified Schematic Diagram 20146201 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM2432 |
ETCTI |
LM2432 220V Monolithic Single Channel 37 MHz HDTV CRT Driver (Rev. E) | |
2 | LM2432 |
National Semiconductor |
220V Monolithic Single Channel 37 MHz HDTV CRT Driver | |
3 | LM2435 |
National Semiconductor |
Monolithic Triple 5.5 ns CRT Driver | |
4 | LM2435T |
National Semiconductor |
Monolithic Triple 5.5 ns CRT Driver | |
5 | LM2436 |
Texas Instruments |
Monolithic Triple 7.5ns CRT Driver | |
6 | LM2436 |
National Semiconductor |
Monolithic Triple 7.5 ns CRT Driver | |
7 | LM2437 |
National Semiconductor |
Monolithic Triple 7.5 ns CRT Driver | |
8 | LM2437T |
National Semiconductor |
Monolithic Triple 7.5 ns CRT Driver | |
9 | LM2438 |
National Semiconductor |
Monolithic Triple 13.5 ns CRT Driver | |
10 | LM2438T |
National Semiconductor |
Monolithic Triple 13.5 ns CRT Driver | |
11 | LM2439 |
National Semiconductor |
Monolithic Triple 9.5 ns CRT Driver | |
12 | LM2439T |
National Semiconductor |
Monolithic Triple 9.5 ns CRT Driver |