ORDERING INFORMATION These devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. .
1
• QML-V Qualified, SMD 5962-7700801VCA, 5962-9673802VCA and 5962-9673802V9B
• Rad-Tolerant: 40 kRad/sec (Si) TID (5962-9673802VCA and 5962-9673802V9B) (1)
– TID Dose Rate = 0.01 rad/sec (Si)
• Wide Supply Ranges
– Single Supply: 2 V to 36 V (Tested to 30 V)
– Dual Supplies: ±1 V to ±18 V (Tested to ±15 V)
• Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typ)
• Low Input Bias Current: 25 nA (Typ)
• Low Input Offset Current: 3 nA (Typ) (LM139)
• Low Input Offset Voltage: 2 mV (Typ)
(1) Radiation tolerance is a typical value based upon initial device qualification with dose rat.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM139-N |
Texas Instruments |
Low-Power Low-Offset Voltage Quad Comparators | |
2 | LM139 |
National Semiconductor |
Low Power Low Offset Voltage Quad Comparators | |
3 | LM139 |
NXP |
Quad voltage comparator | |
4 | LM139 |
STMicroelectronics |
Low-power quad voltage comparators | |
5 | LM139 |
ART CHIP |
Low Power Low Offset Voltage Quad Comparators | |
6 | LM139 |
Texas Instruments |
Quad Differential Comparators | |
7 | LM1391 |
National Semiconductor |
LM1391 Phase-Locked Loop | |
8 | LM139A |
National Semiconductor |
Voltage Comparators | |
9 | LM139A |
Philips |
Quad voltage comparator | |
10 | LM139A |
Texas Instruments |
Quad Differential Comparators | |
11 | LM139A-SP |
Texas Instruments |
Quad Differential Comparator | |
12 | LM139AQML |
National Semiconductor |
Low Power Low Offset Voltage Quad Comparators |