-Vin +Vin No Pin -Vout +Vout No Pin No Pin NA NA = Not for electrical connection Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) • Pin 1 is marked by a “dot” or indentation on the unit MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-.
• 2W Output Power
• Ultra-Miniature SMT Case
• 1,000 VDC Isolation
• 5V, 12 & 24V Inputs
• -40ºC to +85ºC Operation
• 6 Standard Models
• 2.0 MH MTBF Minimum
• Industry Standard Pin-Out
Parameter Input Voltage Range Reverse Polarity Input Current Input Filter
Conditions 5 VDC Input 12 VDC Input 24 VDC Input
Min. 4.5 10.8 21.6
Typ. 5.0 12.0 24.0
Max. 5.5 13.2 26.4 0.3
Units VDC A
Capacitor Typ. ±1.5 For Vin Change of 1% ±1.2 See Model Selection Guide See Note 2 50 Over Line, Load & Temp. 120 ±0.01 Momentary (0.5 Sec.) Conditions 60 Seconds 500 VDC 100 kHz, 1V Min. 1,000 10 70 Conditions.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LF211 |
National Semiconductor |
Voltage Comparators | |
2 | LF2115 |
Sumida |
AC COMMON MODE CHOKES | |
3 | LF2100A-NH |
Soshin |
5 up to 100A/High attenuation | |
4 | LF2108A |
Linear Technology |
Operational Amplifiers | |
5 | LF212S |
micropowerdirect |
2W Single Output SMT DC/DC Converters | |
6 | LF2000A-NH |
Soshin |
5 up to 100A/High attenuation | |
7 | LF2000H-A |
Soshin |
For DC Power supply/On board type | |
8 | LF2001H-A |
Soshin |
For DC Power supply/On board type | |
9 | LF2003H-A |
Soshin |
For DC Power supply/On board type | |
10 | LF2005-S |
LEM |
Current Transducer LF 2005-S | |
11 | LF2005A-NH |
Soshin |
5 up to 100A/High attenuation | |
12 | LF2006H-A |
Soshin |
For DC Power supply/On board type |