Option Reset status Used for system clock oscillation • 455 kHz ceramic resonator is connected between CF1 and CF2 for oscillation. Output • Stops oscillation when receiving CR oscillation stop command. Input port S. • LSI system is reset by charging VDD to S1 to S4 simultaneously. (Mask option) • Data is loaded in accumulator. (1) Low level HOLD Tr YES/N.
• ROM : 1024 × 8 bits (LC573010A) 1536 × 8 bits (LC573015A)
• RAM : 32 × 4 bits
• Cycle time
Cycle time 17.6 µsec System clock generator Ceramic oscillation circuit Oscillation frequency 455 kHz Supply voltage 2.3 to 6.0 V
0.15
0.35
1.0 0.8
0.1
SANYO: MFP24S
Pin Assignment
• Current dvain At normal operation
Current drain 150 µA typ 400 µA typ System clock generator CR oscillation CR oscillation Oscillation frequency 455 kHz 455 kHz Supply voltage 3.0 V 5.0 V
HALT mode
Current drain 80 µA typ 300 µA typ System clock generator CR oscillation CR oscillation Oscillation frequency 455 kHz .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LC573010A |
Sanyo |
4-bit Single Chip Microcontroller | |
2 | LC573102A |
Sanyo |
4-bit Single Chip Microcontroller | |
3 | LC573104A |
Sanyo |
4-bit Single Chip Microcontroller | |
4 | LC5732 |
Sanyo |
4-Bit Microcomputer | |
5 | LC573202A |
Sanyo |
4-Bit Microcontroller with 2K-Byte ROM / 64 4Bits RAM and LCD Driver | |
6 | LC5732H |
Sanyo |
4-Bit Microcomputer | |
7 | LC5732N |
Sanyo |
4-Bit Microcomputer | |
8 | LC5733 |
Sanyo |
SINGLE-CHIP 4-BIT MICROCOMPUTER | |
9 | LC5733H |
Sanyo |
SINGLE-CHIP 4-BIT MICROCOMPUTER | |
10 | LC5734 |
Sanyo |
SINGLE-CHIP 4-BIT MICROCOMPUTER | |
11 | LC573404A |
Sanyo |
4-Bit Single Chip Microcomputer | |
12 | LC573406A |
Sanyo |
4-Bit Single Chip Microcomputer |