1. Standby switching function Power is switched ON and OFF by controlling the High and Low states at pin 7, respectively (standby). To switch power ON, apply 1.5V or more, or 800 µA to pin 7. Current supplied to pin 7 . = . Applied voltage + 2 kΩ Applied voltage – VBE (approx. 0.7V) 2 kΩ 7 2kΩ To bias circuit VCC 2kΩ • When directly connecting the microco.
y large heatsink Ratings 24 25.0 3.0
– 20 to +75
– 40 to +150 Unit V W °C/W °C °C
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipme.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LA4600 |
Sanyo |
Audio Power Amplifier | |
2 | LA4613 |
Sanyo |
Audio Power Amplifier | |
3 | LA4620 |
Sanyo |
Two- channel Audio Power Amplifier | |
4 | LA4625 |
Sanyo |
Two-Channel 13.5W BTL Audio Power Amplifier | |
5 | LA4625 |
ON Semiconductor |
2-channel 13.5W BTL Audio Power Amplifier | |
6 | LA4627 |
Sanyo |
Two-Channel Audio Frequency Power Amplifier | |
7 | LA4628 |
ON Semiconductor |
20W 2-Channel BTL Power Amplifier | |
8 | LA4628 |
Sanyo |
Two-Channel 20 W BTL Audio Power Amplifier | |
9 | LA4629 |
Sanyo |
Two-Channel Audio Frequency Power Amplifier | |
10 | LA4630N |
Sanyo |
9V/12V 3-Dimension Power IC | |
11 | LA4631 |
SANYO Semiconductors |
5 W Two-Channel AF Power Amplifier | |
12 | LA4632 |
Sanyo Semicon Device |
10 W Two-Channel BTL AF Power Amplifier |