on the External Parts Recommended number of the external parts for the LA4460N/4461N is 8 as shown in the Sample Application Circuit 1. Namely they are : · Feedback capacitors 2 pieces 4.7µF/6.3V×2 · Starting time adjustmant resistor 1 pieace 1.5kΩ · Oscillation compensation capacitor 1 piece 0.01µF · Oscillation compensation C · R 4 pieces 0.033µF×2, 4.7Ω×2.
• High gain of 51dB typ. and high power output of 12W typ.
• Possible to delete output and bootstrap capacitors, this encourages cost and space reductions due to external parts reduction.
• Reduced external components (8 pieces recommended, 6 pieces minimum).
• Almost no pop noises heard during power on or off operation.
• Soft tonal quality in saturated power output.
• Low distortion over low to high ranges of the audio frequencies.
• Low residual noises (Rg=0).
• Good operation conditions because of SIP (single ended pins) package having been employed for the LA4460N.
• All pin terminal layo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LA4461 |
Sanyo |
12W AF Power Amplifier | |
2 | LA4460 |
Sanyo |
12W AF Power Amplifier | |
3 | LA4460N |
Sanyo Semicon Device |
(LA4460N / LA4461N) 12W AF Power Amplifier | |
4 | LA4465 |
Sanyo |
BTL-OCL 12W AF Power Amp | |
5 | LA4466 |
Sanyo |
BTL-OCL 12W AF Power Amp | |
6 | LA4400 |
Sanyo Semiconductor |
LA4400 / 4.5W Typ | |
7 | LA4410 |
Sanyo Semiconductor Corporation |
3.5W Type | |
8 | LA4420 |
Sanyo Semiconductor Corporation |
5.5W | |
9 | LA4422 |
Sanyo |
AF Power Amplifier | |
10 | LA4425 |
Sanyo Semiconductor |
LA4425 | |
11 | LA4425A |
Sanyo |
5W Power Amplifier | |
12 | LA4425A |
ON Semiconductor |
5W Power Amplifier |