L9658 is intended to deploy up to 8 squibs and to interface up to 4 satellites. 2 satellite interfaces can be used to interface Hall sensors. Squib drivers are sized to deploy 1.2 A minimum for 2 ms minimum during load dump and 1.75 A minimum for 1ms minimum during load dump. Diagnostic of squib driver and squib resistance measurement is controlled by micro .
■ 8 deployment drivers sized to deliver 1.2 A (min) for 2 ms (min) and 1.75 A (min) for 1 ms (min)
■ Independently controlled high-side and lowside MOS for diagnosis
■ Analog output available for resistance
■ Squib short to ground, short to battery and MOS diagnostic available on SPI register
■ Capability to deploy the squib with 1.2 A (min) or 1.75 A under 35 V load-dump condition and the low side MOS is shorted to ground
■ Capability to deploy the squib with 1.2 A (min) at 6.9 V VRES and 1.75 A at 12 V VRES
■ Interface with 4 satellite sensors
■ Programmable independent current trip points .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | L9654 |
STMicroelectronics |
Quad squib driver and dual sensor interface ASIC | |
2 | L9659 |
STMicroelectronics |
Octal squib driver ASIC | |
3 | L965EC-TR |
LEDopto |
(L965xx-TR) LED Lamp | |
4 | L965GC-TR |
LEDopto |
(L965xx-TR) LED Lamp | |
5 | L965HC-TR |
LEDopto |
(L965xx-TR) LED Lamp | |
6 | L965SRC-TR |
LEDopto |
(L965xx-TR) LED Lamp | |
7 | L965YC-TR |
LEDopto |
(L965xx-TR) LED Lamp | |
8 | L9637 |
STMicroelectronics |
Monolithic bus driver | |
9 | L9637D |
STMicroelectronics |
Monolithic bus driver | |
10 | L9660 |
STMicroelectronics |
Quad squib driver ASIC | |
11 | L9662 |
STMicroelectronics |
Octal squib driver and quad Manchester/PSI5 encoded sensor interface ASIC | |
12 | L9663 |
STMicroelectronics |
Automotive PSI5 Transceiver |