Data Sheet September 2001 L9215A/G Short-Loop Sine Wave Ringing SLIC Introduction The Agere Systems Inc. L9215 is a subscriber line interface circuit that is optimized for short-loop, power-sensitive applications. This device provides the complete set of line interface functionality (including power ringing) needed to interface to a subscriber loop. This d.
s Onboard ringing generation
s Three ringing input options: — Sine wave — PWM — Logic level square wave
s Flexible VCC options: — 5 V or 3.3 V VCC — No
–5 V required
s Battery switch to minimize off-hook power
s 11 operating states: — Scan mode for minimal power dissipation — Forward and reverse battery active — On-hook transmission states — Meter pulse states — Ring mode — Disconnect mode
s Ultralow on-hook power: — 27 mW scan mode — 42 mW activ.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | L9215A |
Agere Systems |
Short-Loop Sine Wave Ringing SLIC | |
2 | L9214A |
Agere Systems |
Low-Cost Ringing SLIC | |
3 | L9214G |
Agere Systems |
Low-Cost Ringing SLIC | |
4 | L9216A |
Agere Systems |
Short-Loop Ringing SLIC | |
5 | L9216G |
Agere Systems |
Short-Loop Ringing SLIC | |
6 | L9217A |
Agere Systems |
Low-Cost Line Interface | |
7 | L9217G |
Agere Systems |
Low-Cost Line Interface | |
8 | L9218A |
Agere Systems |
Low-Cost Line Interface | |
9 | L9218G |
Agere Systems |
Low-Cost Line Interface | |
10 | L9219A |
Agere Systems |
Low-Cost Line Interface | |
11 | L9219G |
Agere Systems |
Low-Cost Line Interface | |
12 | L9277 |
HAMAMATSU |
CW Laser Diode |