L6986I - STMicroelectronics

L6986I synchronous iso-buck converter

The L6986I is a device specifically designed for the isolated buck topology. Due to the P-Channel MOSFET as high-side power switch the device features 100% duty cycle operation. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary si.

Features

• Designed for iso-buck topology
• 4 V to 38 V operating input voltage
• Primary output voltage regulation / no optocoupler required
• 1.9 A typical sink peak primary current capability
• Peak current mode architecture in forced PWM operation
• 300 ns blanking time
• 8 µA IQ-SHTDWN
• Adjustable fSW and synchronization
• Embedded primary output voltage supervisor
• Adjustable soft-start time
• Internal primary current limiting
• Overvoltage protection
• RDS(on) HS = 180 mΩ, RDS(on) LS = 150 mΩ
• Thermal shutdown Applications
• Isolated power supply for SiC MOSFET and IGBT drivers
• Isolated pow.