Pin 01 02 03 04 05 06 07 08 Symbol PBRST Vcc GND IN NMI ST RST WDS Description Pushbutton reset input Power supply Ground Input Non-maskable interrupt Watchdog timer strobe Active low reset Watchdog status Type Input Input Output Input Output Output 9 www.DataSheet4U.com KK1705 N SUFFIX PLASTIC DIP (MS – 001BA) A 8 5 B 1 4 Dimension, mm Symbol A B MIN 8.
•
•
•
•
• rated supply voltage 5.0 V; generation of reset signal when power supply is on for correct start of microprocessor; generation of reset signal when power supply drops below the operating one to avoid incorrect functioning of microprocessor; generation of reset signal when pushing reset button; possibility to program threashold voltage at which reset signal is generated.
KK1705
ORDERING INFORMATION KK1705N Plastic KK1705D SOIC TA = -40° to 85° C for all packages.
The IN1705 contains a source of reference voltage, two analog comparators, watchdog timer, digital sampler, digital del.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | KK1776 |
KODENSHI KOREA |
MICROPOWER PROGRAMMABLE OPERATIONAL AMPLIFIER | |
2 | KK100-6 |
KODENSHI KOREA |
Sensitive Gate Silicon Controlled Rectifiers | |
3 | KK1000 |
RAE |
Power Thyristor | |
4 | KK1000A-1400V |
PST |
HIGH POWER THYRISTOR | |
5 | KK1000A-2000V |
PST |
HIGH POWER THYRISTOR | |
6 | KK1000A-2600V |
PST |
HIGH POWER THYRISTOR | |
7 | KK1040 |
PST |
HIGH POWER THYRISTOR | |
8 | KK1047 |
PST |
HIGH POWER THYRISTOR | |
9 | KK1047S20N |
PST |
HIGH POWER THYRISTOR | |
10 | KK110F |
SanRex Corporation |
THYRISTOR MODULE | |
11 | KK1200-12 |
ETC |
Fast Switching Thyristor | |
12 | KK1200-14 |
ETC |
Fast Switching Thyristor |