The KK1503 is a CMOS LSI LEDs driver circuit. An automatic cut off function is built in to lower the current consumption. The metal mask can be modified in order to adjust the flashing rate, the duty cycle and the time of flash to a particular value. Besides, two output LEDs can be flashed in phase or alternative by mask selection. ABSOLUTE MAXIMUM RATINGS .
• Single 3V battery operation
• Low stand-by current
• No external R-C component required for oscillation
• Direct drive LEDs (open-drain output)
FUNCTIONS
• One shot mode
• Flash Rate 4,7 Hz
• Duty Cycle 1/4
• Flash Duration 4.3 sec
• Alternative outputs
DESCRIPTION
The KK1503 is a CMOS LSI LEDs driver circuit. An automatic cut off function is built in to lower the current consumption. The metal mask can be modified in order to adjust the flashing rate, the duty cycle and the time of flash to a particular value. Besides, two output LEDs can be flashed in phase or alternative by mask selecti.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | KK1517 |
KODENSHI KOREA |
TYPICAL APPLICATION CIRCUIT | |
2 | KK100-6 |
KODENSHI KOREA |
Sensitive Gate Silicon Controlled Rectifiers | |
3 | KK1000 |
RAE |
Power Thyristor | |
4 | KK1000A-1400V |
PST |
HIGH POWER THYRISTOR | |
5 | KK1000A-2000V |
PST |
HIGH POWER THYRISTOR | |
6 | KK1000A-2600V |
PST |
HIGH POWER THYRISTOR | |
7 | KK1040 |
PST |
HIGH POWER THYRISTOR | |
8 | KK1047 |
PST |
HIGH POWER THYRISTOR | |
9 | KK1047S20N |
PST |
HIGH POWER THYRISTOR | |
10 | KK110F |
SanRex Corporation |
THYRISTOR MODULE | |
11 | KK1200-12 |
ETC |
Fast Switching Thyristor | |
12 | KK1200-14 |
ETC |
Fast Switching Thyristor |