Table 2. Pin Description Pin No Pin Name Schematic Description 1 2 3 Red OSD Input (ROSD) Green OSD Input (GOSD) Blue OSD Input (BOSD) 1.29/ 1.02V VCC OSD input signals are in TTL level and will be connected to ground when switching to video input 1.16/ 0.90V PIN 1 4 Video/OSD Switch (VI/OSD_SW) 6V VCC Video/OSD switch signal is TTL level PIN4 = “h.
• 3-Channel R/G/B Video Amplifier, 175MHz @f-3dB
• I2C Bus Control Items - Contrast Control - SUB Contrast Control For Each Channel - Brightness Control - OSD Contrast Control - Cut-off Brightness Control - Cut-off Control For Each Channel - Switch Registers for SBLK and Video Half Tone and Cut-Off INT/EXT and BPS (Blank Gate Polarity Selection)
• SUB Contrast Control Range: -11dB
• Capable of 7.0Vpp Output Swing Range
• Video/OSD High Speed Switch
• Clamp Gate With Anti OSD Sagging
• B/U(Brightness Uniformity) Interface
• Video Input Clamp, BRT Clamp
• Video & OSD Half Tone Function on OSD Pi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | KA2500 |
Samsung |
WIDE BAND ANALOG SWITCH FOR MONITORS | |
2 | KA2504 |
Samsung |
I2C BUS CONTROLLED R/G/B VIDEO AMPLIFIER | |
3 | KA2507 |
Samsung |
WIDE BAND ANALOG SWITCH FOR MONITORS | |
4 | KA2511B |
Samsung |
DEFLECTION PROCESSOR FOR MULTISYNC MONITORS | |
5 | KA2531S28 |
NTE Electronics |
Potentiometer | |
6 | KA2541S28 |
NTE Electronics |
Potentiometer | |
7 | KA258 |
Fairchild |
Dual Operational Amplifier | |
8 | KA2580A |
Samsung Electronics |
(KA2580A/8A) 8-Channel Source Drivers | |
9 | KA2588A |
Samsung Electronics |
(KA2580A/8A) 8-Channel Source Drivers | |
10 | KA258A |
Fairchild |
Dual Operational Amplifier | |
11 | KA2002-BE10A |
Rohm |
Compact Battery drivable thick film thermal printhead | |
12 | KA2002-BE13A |
Rohm |
ECR 2.7V Print Voltage |