www.DataSheet4U.com VDE COMPACT POWER RELAY FOR INDUCTIVE LOAD 30.4 1.197 JM-RELAYS • Flux resistance mechanism The terminal area is plugged with resin to prevent flux seepage during PCB mounting. (TMP type) • Conforms to the various safety standards UL, CSA approved. TÜV, VDE under application. • The line up can support economical mounting methods. The re.
• Compact, high-capacity, and resistant to inductive loads The relay is a compact 16×30.4×26.5 mm .630×1.197×1.043 inch. It can control an inductive load (cosϕ = 0.7) with inrush current of 70 A and steady state current of 20 A.
• Excellent contact welding resistance High contact pressure, a forced opening mechanism, and a forced wiping mechanism realizes an excellent contact welding resistance.
• High breakdown voltage and surge resistant relay More than 6.4 mm .252 inch maintained for the insulation distance between contacts and coil, and the breakdown voltage between contacts and coil is 5.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | JM11401 |
PMI |
(JM11401 - JM11406) JAN JFET-INPUT OPERATIONAL AMPLIFIERS | |
2 | JM11402 |
PMI |
(JM11401 - JM11406) JAN JFET-INPUT OPERATIONAL AMPLIFIERS | |
3 | JM11403 |
PMI |
(JM11401 - JM11406) JAN JFET-INPUT OPERATIONAL AMPLIFIERS | |
4 | JM11404 |
PMI |
(JM11401 - JM11406) JAN JFET-INPUT OPERATIONAL AMPLIFIERS | |
5 | JM11405 |
PMI |
(JM11401 - JM11406) JAN JFET-INPUT OPERATIONAL AMPLIFIERS | |
6 | JM11406 |
PMI |
(JM11401 - JM11406) JAN JFET-INPUT OPERATIONAL AMPLIFIERS | |
7 | JM13501 |
PMI |
Ultra Low Offset Voltate Operational Amplifier | |
8 | JM13502 |
PMI |
Ultra Low Offset Voltate Operational Amplifier | |
9 | JM161B |
JHD |
LCD Module | |
10 | JM-M1088BHG |
JINGMEI |
LED Module | |
11 | JM20329 |
JMicron |
Hi-Speed USB to SATA Bridge | |
12 | JM20330 |
JMicron |
Serial ATA Bridge Chip |