ISP1103DB - NXP

ISP1103DB Universal Serial Bus transceiver

The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical layer of the Universal Serial Bus. It supports transmitting and receiving serial data .

Features

s s s s s s s s s s s s s s Complies with Universal Serial Bus Specification Rev. 1.1 Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates Slew-rate controlled differential data driver Differential input receiver with wide common-mode range and very high data input sensitivity Stable RCV output during SE0 condition Two single-ended receivers with hysteresis Supports ‘Philips Encoded Data Interface’ and ‘USB-IF Standard Data Interface’ Low-power operation in ‘suspend’ mode Operates on a 3.3 V supply voltage Fully backward compatible with PDIUSBP11A Compatible with VHDL ‘S.