PIN FUNCTION RO Receiver output: If A - B -50mV, RO is high; If A - B -200mV, RO is low; RO = High if A and B are unconnected (floating) or shorted. RE Receiver output enable. RO is enabled when RE is low; RO is high impedance when RE is high. DE Driver output enable. The driver outputs, Y and Z, ar.
• Pb-Free Available (RoHS Compliant)
• RS-485 I/O Pin ESD Protection . . . . . . . . . . ±15kV HBM
Class 3 ESD Protection (HBM) on all Pins. . . . . . . . >7kV
• Tiny MSOP Packages Save 50% Board Space
• Full Fail-Safe (Open, Short, Terminated and Floating)
Receivers
• Hot Plug Circuitry (ISL83080E, ISL83082E, ISL83083E,
ISL83085E) - Tx and Rx Outputs Remain Three-state During
Power-up/Power-down
• True 1/8 Unit Load Allows up to 256 Devices on the Bus
• Specified for Single 5V, 10% Tolerance, Supplies
• High Data Rates. . . . . . . . . . . . . . . . . . . . . up to 10Mbps
• Low Quiescent Supp.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ISL83080E |
Renesas |
RS-485/RS-422 Transceivers | |
2 | ISL83082E |
Renesas |
RS-485/RS-422 Transceivers | |
3 | ISL83083E |
Renesas |
RS-485/RS-422 Transceivers | |
4 | ISL83084E |
Renesas |
RS-485/RS-422 Transceivers | |
5 | ISL83085E |
Renesas |
RS-485/RS-422 Transceivers | |
6 | ISL83086E |
Renesas |
RS-485/RS-422 Transceivers | |
7 | ISL83070E |
Renesas |
RS-485/RS-422 Transceivers | |
8 | ISL83071E |
Renesas |
RS-485/RS-422 Transceivers | |
9 | ISL83072E |
Renesas |
RS-485/RS-422 Transceivers | |
10 | ISL83073E |
Renesas |
RS-485/RS-422 Transceivers | |
11 | ISL83075E |
Renesas |
RS-485/RS-422 Transceivers | |
12 | ISL83076E |
Renesas |
RS-485/RS-422 Transceivers |