PIN # 1, 15, 16 2 3 4 5 6 7 8 PIN NAME VIN GRN RED TIME GND DT EN V2P9 DESCRIPTION VIN is the input power source. It is recommended to have a 1Ω resistor in series with the input decoupling capacitor to prevent an over-shoot voltage when the input cable is plugged in. Open-drain LED drive pin. This pin sinks a constant-current 10mA to drive a green LED in a .
include improved accuracy, pre-charge circuit verification, and enhanced LED indicator function. Working with a current-limited AC/DC converter, the dualmode charger charges a Li-ion battery with the same current profile as a traditional linear charger. The constant charge current is determined by the current limit of the AC/DC converter. The constant output voltage is fixed at 4.2V. When the battery voltage is below 2.8V, the charger preconditions the battery with a low trickle-charge current. The charge status is indicated by a bi-color LED. A safety timer prevents charging a dead battery fo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ISL6291 |
Intersil Corporation |
Li-ion/Li Polymer Linear Battery Charger | |
2 | ISL6292 |
Renesas |
Li-ion/Li Polymer Battery Charger | |
3 | ISL6292B |
Renesas |
Li-ion/Li Polymer Battery Charger | |
4 | ISL6292C |
Renesas |
Li-ion/Li Polymer Battery Charger | |
5 | ISL6292D |
Renesas |
Li-ion/Li Polymer Battery Charger | |
6 | ISL6293 |
Renesas |
Li-ion/Li Polymer Battery Charger Accepting Two Power Sources | |
7 | ISL6294 |
Renesas |
High Input Voltage Charger | |
8 | ISL6294A |
Renesas |
High Input Voltage Charger | |
9 | ISL6295 |
Intersil |
Low Voltage Fuel Gauge | |
10 | ISL6296 |
Intersil Corporation |
FlexiHash | |
11 | ISL6296A |
Intersil |
FlexiHash | |
12 | ISL6298 |
Renesas |
Li-ion/Li-Polymer Battery Charger |