IS31LT3135 is a main/sub dual-channel LED driver. When the main channel works,it is a constant current source driving the main LED and the current is set by an external resistor connected to the ISET pin. It needs only 0.1v dropout voltage for 200mA output current. When the sub-channel works, the chip will pull down the sub LED’s cathode to ground. Normally .
Power supply undervoltage detect Main channel short protection Over-temperature protection Input voltage range: 2.7V~5.5V Main and sub-channel current set by external resistor Main channel Vdp=0.1V Low quiescent current Assembled in SOP-8 package
APPLICATIONS
Miner lamp Other LED lighting
TYPICAL APPLICATION CIRCUIT
http://www.DataSheet4U.net/
IS31LT3135
Figure 1
.
Copyright © 2011 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no liability.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | IS31LT3117 |
Lumissil |
4-CHANNEL CONSTANT CURRENT REGULATOR | |
2 | IS31LT3117 |
ISSI |
4-CHANNEL CONSTANT CURRENT REGULATOR | |
3 | IS31LT3170 |
Lumissil |
10-TO-150MA CONSTANT-CURRENT LED DRIVER | |
4 | IS31LT3170 |
ISSI |
10-TO-150MA CONSTANT-CURRENT LED DRIVER | |
5 | IS31LT3171 |
Lumissil |
10-TO-150MA CONSTANT-CURRENT LED DRIVER | |
6 | IS31LT3171 |
ISSI |
10-TO-150MA CONSTANT-CURRENT LED DRIVER | |
7 | IS31LT3172 |
Lumissil |
10-TO-200MA CONSTANT-CURRENT LED DRIVER | |
8 | IS31LT3173 |
Lumissil |
10-TO-200MA CONSTANT-CURRENT LED DRIVER | |
9 | IS31LT3177 |
Lumissil |
10-TO-200MA CONSTANT-CURRENT LED DRIVER | |
10 | IS31LT3178 |
Lumissil |
10-TO-200MA CONSTANT-CURRENT LED DRIVER | |
11 | IS31LT3350 |
Lumissil |
40V LED DRIVER | |
12 | IS31LT3350 |
ISSI |
40V LED DRIVER |