Power Module The IRPT2056A Power Module, shown in figure 1, is a chip and wire epoxy encapsulated module. It houses input rectifiers, output inverter, current sense shunts and NTC thermistor. The 3phase input bridge rectifiers are rated at 800V. The brake circuit uses 600V IGBT and freewheeling diode. The inverter section employs 600V, short circuit rated, u.
tput inverter, current sense shunts and NTC thermistor. The 3phase input bridge rectifiers are rated at 800V. The brake circuit uses 600V IGBT and freewheeling diode. The inverter section employs 600V, short circuit rated, ultrafast IGBT's and ultrafast freewheeling diodes. Current sensing is achieved through 25 mΩ low inductance shunts provided in the positive and negative DC bus rail. The NTC thermistors provide temperature sensing capability. The lead spacing on the power module meets UL840 pollution level 3 requirements. The power circuit and layout within the module are carefully designed.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | IRPT2051 |
International Rectifier |
Integrated Power Stage | |
2 | IRPT2059A |
International Rectifier |
Power Module for 2 hp Motor Drives | |
3 | IRPT2061A |
International Rectifier |
Power Module for 1.5 hp Motor Drives | |
4 | IRPT2062A |
International Rectifier |
Power Module for 3 hp Motor Drives | |
5 | IRPT1053A |
International Rectifier |
Power Module for 1 hp Motor Drives | |
6 | IRPT1057A |
International Rectifier |
Power Module | |
7 | IRPT1058 |
International Rectifier |
Integrated Power Stage | |
8 | IRPT1058A |
International Rectifier |
Power Module for 0.75 hp Motor Drives | |
9 | IRPT1059 |
International Rectifier |
Integrated Power Stage for 1hp Motor Drives | |
10 | IRPT1059A |
International Rectifier |
Power Module for 1 hp Motor Drives | |
11 | IRPT1060 |
International Rectifier |
nullIntegrated Power Stage for 1 hp Motor Drives | |
12 | IRPT1061A |
International Rectifier |
Power Module for 1 hp Motor Drives |