Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The ICS85314I-11 is a low skew, high performance 1-to-5 Differential-to-2.5V/3.3V LVPECL HiPerClockS™ fanout buffer and a member of the HiPerClockS™ family of High Performance Clock Solutions from ICS. The ICS85314I-11 has two selectable differential clock inputs. The CLK0, nCLK0 and CLK1, nCLK1 pairs can accept most standard differential input levels. The c.
• 5 differential 2.5V/3.3V LVPECL outputs
• Selectable differential CLKx, nCLKx inputs
• CLK0, nCLK0 and CLK1, nCLK1 pairs can accept the following differential input levels: LVPECL, LVDS, LVHSTL, HCSL, SSTL
• Maximum output frequency: 700MHz
• Translates any single-ended input signal to 3.3V LVPECL levels with resistor bias on nCLK input
• Output skew: 30ps (maximum)
• Part-to-part skew: 350ps (maximum)
• Propagation delay: 1.8ns (maximum)
• RMS phase jitter @ 155.52MHz (12kHz - 20MHz): 0.05ps (typical)
• LVPECL mode operating voltage supply range: VCC = 2.375V to 3.8V, VEE = 0V
• -40°C to 85.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | ICS85314-01 |
ICST |
LVPECL FANOUT BUFFER |
|
| 2 | ICS85314-01 |
ICST |
LVPECL FANOUT BUFFER |
|
| 3 | ICS8531-01 |
ICST |
LVPECL FANOUT BUFFER |
|
| 4 | ICS85310I-11 |
ICST |
ECL/LVPECL FANOUT BUFFER |
|
| 5 | ICS85310I-21 |
ICST |
ECL/LVPECL FANOUT BUFFER |
|
| 6 | ICS85310I-31 |
ICST |
DIFFERENTIAL-TO-ECL/LVPECL FANOUT BUFFER |
|
| 7 | ICS85311 |
ICST |
ECL/LVPECL Fanout Buffer |
|
| 8 | ICS853111 |
ICST |
LVPECL/ECL FANOUT BUFFER |
|
| 9 | ICS853111-01 |
ICST |
LVPECL/ECL FANOUT BUFFER |
|
| 10 | ICS853111-02 |
ICST |
LVPECL/ECL FANOUT BUFFER |
|
| 11 | ICS853111A |
ICST |
LVPECL/ECL FANOUT BUFFER |
|
| 12 | ICS853111B |
ICST |
LVPECL/ECL FANOUT BUFFER |
|