ICS1893AF - Renesas

ICS1893AF 3.3-V 10Base-T/100Base-TX Integrated PHYceiver

ICS1893AF Document Type: Data Sheet Document Stage: Release 3.3-V 10Base-T/100Base-TX Integrated PHYceiver™ General The ICS1893AF is a lower cost, re-packaged version of the ICS1893Y-10. The ICS1893AF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The IC.

Features

• Single 3.3V power supply
• Supports category 5 cables with attenuation in excess of 24dB at 100 MHz.
• DSP-based baseline wander correction to virtually eliminate killer packets
• Low-power, 0.35-micron CMOS (typically 400 mW)
• Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sublayers of IEEE standard
• 10Base-T and 100Base-TX IEEE 802.3 compliant
• Clock or crystal supported
• Media Independent Interface (MII) supported
• Managed or Unmanaged Applications
• 10M or 100M Half and Full Duplex Modes
• Auto-Negotiation with Parallel detection for Legacy products
• Fully in.