The ICM320T is a high resolution, low power, small form factor device 3.2Megapixel digital color CMOS image sensor. The ICM320T is based on IC Media’s high performance, wide acceptance angle 2.575µm TopazPixel™ technology. The ICM320T supports a 1/2.7” optical format with short track lengths of less than 7.0mm. High responsivity, low noise and image quality .
QXGA and standby current is 8µA.
The ICM320T image sensor’s registers are programmed through an efficient, two-wire serial control interface (SIF) enabling flexible control of the sensor’s operating modes. It outputs 10-bit raw Bayer (RGB) pixel samples synchronized to the associated pixel clock (PCLK) as well as vertical and horizontal synchronization signals (VSYNC/HSYNC).
Feature Overview
• Wide acceptance angle pixel architecture enabling compact camera module form factors
• Very low active and stand-by power consumption
• Very good low light sensitivity
• Automatic dark level offset comp.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ICM3528ER152V |
Vishay |
High-Current Choke | |
2 | ICM3528ER701V |
Vishay |
High-Current Choke | |
3 | ICM36R |
ISO TECH |
Clamp Meter | |
4 | ICM-0805 |
Vishay Siliconix |
Surface Mount Common Mode Choke | |
5 | ICM-1206 |
Vishay Siliconix |
Surface Mount Common Mode Choke | |
6 | ICM-20600 |
InvenSense |
High Performance 6-Axis MEMS MotionTracking | |
7 | ICM-20601 |
InvenSense |
Wide-Range 6-Axis MotionTracking | |
8 | ICM-20602 |
TDK |
High Performance 6-Axis MEMS MotionTracking | |
9 | ICM-20602 |
InvenSense |
High Performance 6-Axis MEMS MotionTracking | |
10 | ICM-20608 |
InvenSense |
A 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer | |
11 | ICM-20608-G |
InvenSense |
A 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer | |
12 | ICM-20648 |
InvenSense |
MotionTracking device |