The ICM-20689 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) in a small 4x4x0.9mm (24pin QFN) package. • Large 4K-byte FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a l.
an operating voltage range down to 1.71 V. Communication ports include I2C and high speed SPI at 8 MHz.
APPLICATIONS
• Mobile phones and tablets
• Drones
• Motion-based game controllers
• 3D remote controls for Internet connected DTVs and
set top boxes, 3D mice
• Wearable sensors for health, fitness and sports
FEATURES
• User-programmable interrupts
• Wake-on-motion interrupt for low power operation
of applications processor
• 4K-byte FIFO buffer enables the applications
processor to read the data in bursts
• On-Chip 16-bit ADCs and Programmable Filters
• Host interface: 8 MHz SPI or 400 kHz .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ICM-20600 |
InvenSense |
High Performance 6-Axis MEMS MotionTracking | |
2 | ICM-20601 |
InvenSense |
Wide-Range 6-Axis MotionTracking | |
3 | ICM-20602 |
TDK |
High Performance 6-Axis MEMS MotionTracking | |
4 | ICM-20602 |
InvenSense |
High Performance 6-Axis MEMS MotionTracking | |
5 | ICM-20608 |
InvenSense |
A 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer | |
6 | ICM-20608-G |
InvenSense |
A 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer | |
7 | ICM-20648 |
InvenSense |
MotionTracking device | |
8 | ICM-20648 |
TDK |
6-Axis MEMS MotionTracking Device | |
9 | ICM-20649 |
InvenSense |
Wide-Range 6-Axis MEMS MotionTracking Device | |
10 | ICM-20690 |
InvenSense |
Dual-Interface MotionTracking device | |
11 | ICM-20789 |
TDK |
High Performance Integrated 6-Axis Inertial and Barometric Pressure Sensor | |
12 | ICM-20948 |
InvenSense |
Lowest Power 9-Axis MEMS MotionTracking |