Key Specifications The HWD2163 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4Ω load (Note 1) or 2.5W to a 3Ω load (Note 2) with less than 1.0% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones. Audio power amplifie.
an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on. Note 1: An HWD2163IUP or HWD2163IVG that has been properly mounted to a circuit board will deliver 2.2W into 4Ω. The other package options for the HWD2163 will deliver 1.1W into 8Ω. See the Application Information sections for further information concerning the HWD2163IUP and HWD2163IVG. n PO at 1% THD+N n HWD2163IVG, 3Ω,4Ω loads 2.5W(typ), 2.2W(typ) n HWD2163IUP, 3Ω,4Ω loads 2.5W(typ.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HWD2161 |
CSMSC |
1.1W Audio Power Amplifier | |
2 | HWD2108 |
CSMSC |
Dual 105mW Headphone Amplifier | |
3 | HWD2111 |
CSMSC |
Dual 105mW Headphone Amplifier | |
4 | HWD2119 |
CSMSC |
350mW Audio Power Amplifier | |
5 | HWD2171 |
ETC |
1.5W audio power amplifier | |
6 | HWD2171 |
CSMSC |
3W Audio Power Amplifier | |
7 | HWD2180 |
CSMSC |
Dual 250 mW Audio Power Amplifier | |
8 | HWD2182 |
CSMSC |
250mW Audio Power Amplifier | |
9 | HWD2190 |
CSMSC |
1 Watt Audio Power Amplifier | |
10 | HWD2038 |
ETC |
Mono 2W Audio Power Amplifiers | |
11 | HWD-24050-3L |
GROUP-TEK |
DC-DC Converter Modules | |
12 | HWD075DGE |
Power-One |
HWD Series . 75 Watt/ Half-Brick DC/DC Converter Wide Input Range Dual Output |