strings ♦♦ Integrated an internal 1.5kΩ pull-high resistor on D+ pin • Serial Interface – I2C ♦♦ Supports clock rate up to 400kHz ♦♦ Supports Master and Slave modes decided by AP command ♦♦ Supports maximum 62 bytes transmit buffer and 62 bytes receive buffer ♦♦ Supports SDA (Master mode) and SCL or SDA (Slave mode) pins resume signal to request a remote wa.
• Operating Voltage (VDD): 3.3V~5.5V
• I2C pins Voltage (VDDIO): 1.8V~VDD (Less than VDD
voltage)
• Fully integrated internal 12MHz oscillator with 0.25% accuracy for all USB modes which requires no external components
• USB interface ♦♦ USB 2.0 Full Speed compatible ♦♦ Implements USB protocol composite device:
–
– Communication Device Class (CDC) for communications and configuration.
–
– Human Interface Device (HID) for user configure USB VID, PID and device description strings ♦♦ Integrated an internal 1.5kΩ pull-high resistor on D+ pin
• Serial Interface
– I2C ♦♦ Supports clock rate up t.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HT42B533-x |
Holtek Semiconductor |
USB to SPI Bridge IC | |
2 | HT42B534-x |
Holtek Semiconductor |
USB to UART Bridge IC | |
3 | HT42B564-x |
Holtek Semiconductor |
USB (HID) to UART Bridge IC | |
4 | HT400 |
Gilway Technical |
(HT456 / HT458 / HT400) Commercial Grade Lampholders | |
5 | HT4054 |
HOTCHIP |
Li-ion Battery Charger | |
6 | HT4100F |
Htv |
Relay | |
7 | HT456 |
Gilway Technical |
(HT456 / HT458 / HT400) Commercial Grade Lampholders | |
8 | HT458 |
Gilway Technical |
(HT456 / HT458 / HT400) Commercial Grade Lampholders | |
9 | HT45B0003 |
Holtek Semiconductor |
Dual Line Power Line Data Transceiver | |
10 | HT45B0005 |
Holtek Semiconductor |
Dual Line Power Line Data Transceiver | |
11 | HT45B0016 |
Holtek Semiconductor |
Wireless Charger Transmitter Power Stage | |
12 | HT45B0C |
Holtek Semiconductor |
MOSFET gate drivers |