NAME VCC GND CK_IN I TYPE The +5V power supply pins. The device ground. Input Sample Clock. Operations in the HDF are synchronous with the rising edge of this clock signal. The maximum clock frequency is 33MHz. CK_IN is synchronous with FIR_CK and thus the two clocks may be tied together if required, or CK_IN can be divided down from FIR_CK. CK_IN is a CMOS .
• Single Chip Narrow Band Filter with up to 96dB Attenuation
• DC to 33MHz Clock Rate
• 16-Bit 2’s Complement Input
• 20-Bit Coefficients in FIR
• 24-Bit Extended Precision Output
• Programmable Decimation up to a Maximum of 16,384
• Standard 16-Bit Microprocessor Interface
• Filter Design Software Available DECIMATE™
• Up to 512 Taps
Applications
• Very Narrow Band Filters
• Zoom Spectral Analysis
• Channelized Receivers
• Large Sample Rate Converter
Ordering Information
PART NUMBER HSP43220VC-33 HSP43220JC-15 HSP43220JC-25 HSP43220JC-33 HSP43220GC-25 HSP43220GC-33 TEMP. RANGE (oC) 0 to 70 0.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HSP43216 |
Intersil Corporation |
Halfband Filter | |
2 | HSP43124 |
Intersil Corporation |
Serial I/O Filter | |
3 | HSP43168 |
Intersil Corporation |
Dual FIR Filter | |
4 | HSP43881 |
Intersil Corporation |
Digital Filter | |
5 | HSP43891 |
Intersil Corporation |
Digital Filter | |
6 | HSP45102 |
Intersil Corporation |
12-Bit Numerically Controlled Oscillator | |
7 | HSP45106 |
Intersil Corporation |
16-Bit Numerically Controlled Oscillator | |
8 | HSP45116 |
Intersil Corporation |
Numerically Controlled Oscillator/Modulator | |
9 | HSP45116A |
Intersil Corporation |
Numerically Controlled Oscillator/ Modulator | |
10 | HSP45240 |
Intersil Corporation |
Address Sequencer | |
11 | HSP45240883 |
Intersil Corporation |
Address Sequencer | |
12 | HSP45256 |
Intersil Corporation |
Binary Correlator |