The HCPL-4100 optocoupler is designed to operate as a transmitter in equipment using the 20 mA current loop. 20 mA current loop systems conventionally signal a logic high state by transmitting 20 mA of loop current (MARK), and signal a logic low state by allowing no more than a few milliamperes of loop current (SPACE). Optical coupling of the signal from the.
• Guaranteed 20 mA Loop Parameters
• Data Input Compatible with LSTTL, TTL and CMOS Logic
• Guaranteed Performance over Temperature (0°C to 70°C)
• Internal Shield for High Common Mode Rejection
• 20 kBaud Data Rate at 400 Metres Line Length
• Guaranteed On and Off Output Current Levels
• Safety Approval UL Recognized -2500 V rms for 1 minute CSA Approved
• Optically Coupled 20 mA Current Loop Receiver, HCPL-4200, Also Available
Description
The HCPL-4100 optocoupler is designed to operate as a transmitter in equipment using the 20 mA current loop. 20 mA current loop systems conventionally sig.
The HCPL-4100 optocoupler is designed to operate as a transmitter in equipment using the 20 mA current loop. 20 mA curr.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HCPL-4200 |
HP |
Optically Coupled 20 mA Current Loop Receiver | |
2 | HCPL-4200 |
Avago |
Optically Coupled 20 mA Current Loop Receiver | |
3 | HCPL-4502 |
QT Optoelectronics |
HIGH SPEED TRANSISTOR OPTOCOUPLERS | |
4 | HCPL-4502 |
Fairchild Semiconductor |
(HCPL-xxxx) HIGH SPEED TRANSISTOR OPTOCOUPLERS | |
5 | HCPL-4502 |
Hewlett-Packard |
(HCPL-xxxx) Single Channel / High Speed Optocouplers | |
6 | HCPL-4502 |
Avago |
High Speed Optocouplers | |
7 | HCPL-4503 |
Hewlett-Packard |
(HCPL-xxxx) Single Channel / High Speed Optocouplers | |
8 | HCPL-4503 |
Avago |
High Speed Optocouplers | |
9 | HCPL-4504 |
HP |
High Speed Optocouplers | |
10 | HCPL-4504 |
AVAGO |
High Speed Optocouplers | |
11 | HCPL-4506 |
HP |
Intelligent Power Module and Gate Drive Interface Optocouplers | |
12 | HCPL-4506 |
Avago |
Intelligent Power Module and Gate Drive Interface Optocouplers |