The HA-A1370 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying Pin 1 of the HA-A1370 units with a logic “0" enables the output on Pin 5. Alternately, supplying pin 1 of the HA-A1380 units with a logic “1" enables its Pin 5 output. In the disabled mode, Pin 5 presents a high impeda.
• Wide frequency range
– 0.5MHz to 20.0MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• High shock resistance, to 3000g
• All metal, resistance weld, hermetically sealed
package
• 3.3 Volt operation
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• Low power consumption
• Gold plated leads - Solder dipped leads available
upon request
Electrical Connection
Pin Connection.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HA13702A |
HItachi |
IPIC High Side Bulb Driver | |
2 | HA13703A |
HItachi |
IPIC High Side Inductive Load Driver | |
3 | HA13705 |
Hitachi Semiconductor |
IPIC Intelligent Power IC High Side Solenoid Driver | |
4 | HA13705C |
Hitachi Semiconductor |
IPIC Intelligent Power IC High Side Solenoid Driver | |
5 | HA1374 |
Renesas Technology |
Dual 2 to 3W Audio Power Amplifiers | |
6 | HA1377 |
Hitachi |
Dual 5.8W Audio Power Amplifiers | |
7 | HA13 |
Jinan Gude Electronic Device |
1.0 AMP.HIGH EFFICIENCY RECTIFIERS | |
8 | HA13001 |
ETC |
2 x Power Amplifier | |
9 | HA13001 |
Hitachi |
5.5W Dual / 17.5W BTL Audio Power Amplifier | |
10 | HA13007 |
Hitachi Semiconductor |
QUAD DRIVER | |
11 | HA13108 |
ETC |
HA13108 | |
12 | HA13115 |
ETC |
AUDIO POWER AMPLIFIER |